QUICK START
GDP-32
24
Section 4, Page 11
September 2015
4.8
SET TIME
After the Timing Card has been synchronized to either GPS or an XMT, the receiver's time clock
should be set. Press
to bring up the time submenu. Press '
1
' to use GPS time, or press
'
2
' to enter the time manually.
SET GPS TIME
To set GPS time, the GPS Local Time Differential, and the GPS Leap Second Offset values must
be set. Press
and
to move to the different fields. Enter values for the fields
directly, or use the
and
keys to make adjustments. After making adjustments,
move the cursor back to the MODE field, and make sure the GPS Local Time appears correct. If
not, adjust the Local Time Differential setting. When correct, press
to update the system
clock.
<0408a_24SYNC_TimeGPS>
Note: Since June 2012, the Leap Second Offset has been 16 seconds. Refer to internet
documentation, or contact Zonge for the latest setting.
SET TIME MANUALLY
To set the time manually, use
and
to move to the appropriate Date or Time field
that may need adjustment. When corrected to the local time, press
.
Pg Up
PREV F IELD
Pg Dn
NEXT FIELD
Home
SELECT UP
SELECT DN
End
Enter
Pg Up
PREV F IELD
Pg Dn
NEXT FIELD
Enter
