Zone Ozonetech Journey, Руководство по установке

Страница: 8 / 41

2. INSTALLATION
2
O
ZONETECH
M
ODULE
WARNING
Pay particular attention to the safety and installation instructions in this guide to prevent damage to the unit or
vehicle as well as serious injuries to anyone working on the vehicle, occupants or you.
The installation technician should have a good understanding of vehicular electrical and electronic systems to
perform a compliant and safe installation.
To make this product works with maximum efficiency, protect all electrical and mechanical components according
to standards.
Once the installation is completed, make sure the proper functioning of the system and all accessories in the
vehicle.
2.1 MECANICAL INSTALLATION NOTES
Installation of the Ozonetech Module
During the installation, be sure that the module cannot be damaged because of unsafely objects being in the vehicle
and that the chosen location won’t be subject to bad weather.
The module must be installed in the vehicle passenger compartment or in a waterproof case.
The module is designed to tolerate a weather margin which varies from -40°C to 75°C (-40°F to 167°F).
There are many ways to fix the module; the technician must consult the user to answer his needs in the best way he
can. It is highly recommended to fix it so it will be accessible by the user at any time and in all conditions of
operation.
Be sure that the module is fixed in a way that it won’t move when a key is pressed on.
WARNING : Make sure the system clears the space for the deployment of all airbags.
2.2 ELECTRICAL INSTALLATION NOTES
Make all the necessaries connections so that the system and its components will be functioning. Install all the electric
protection (fuse, breaker, fuse wire) on the power cord as close as possible of the alimentation source. All wires
going through a partition must be protected by a rubber or plastic washer.
Be sure to follow all instructions included in this guide.
CAUTION : Before installation, disconnect the negative of the vehicle’s battery. Failure to follow the
recommendations found in this guide could result in fire or injury.
Please wait until all electrical connections are completed and checked before reconnecting the
battery negative.