Zone Ozonetech Journey, Руководство по установке

Страница: 35 / 41

5. PINOUT
29
Function Connection Signal Identification Description
Power source C2.6, C2.12
OZTECH power
inputs O-Zone-Tech module power inputs.
(C2.6 = Negative (GND) signal, C2.12 = 12Vdc)
Module
communication
USB USB 2.0 connector O-Zone-Tech to PC communication port
Inputs
C1.15 &
C1.17
Temperature sensor
Temperature sensor input signals.
Internal temperature sensor = Optional
External temperature sensor = Standard
C1.13 Analog input Additional programmable analog input
C1.11 Antitheft
Antitheft mode activation input. A positive signal applies
when the engine is turn OFF will activated this mode
(optional).
C1.9 Spare Additional programmable input
C1.7 Hood switch
Hood open/closed signal. Tells the module the position of the
hood.
C1.3 Emergency Light Emergency light input signal.
C1.1 Keyless mode
Keyless mode activation input. A negative signal generated
by a momentary switch is required to activate this mode.
C2.8 & C2.9 CAN High and Low CAN bus communication signal
C2.1 Ignition signal Ignition status from the RF module
Outputs
C1.2, C1.4,
C1.6 & C1.8
Positive outputs 500mA positive outputs.
C1.12 Starter control output Output controlling the start signal to BCM
C2.7 Ignition control output Output controlling the Ignition