Zone Ozonetech Journey, Руководство по установке

Страница: 28 / 41

PROGRAMMING …(cont.)
22
3.5.7 GENERAL TAB:
The program first opens up on the ‘‘General’’ thumbnail. You will need to set the Vehicle
Number (ID), program the Keyless Mode Duration, Anti-theft input and select individual
inputs that may have a negative polarity.
•
Vehicle Number (ID): Input field for the VIN number (Vehicle Identification Number).
•
Keyless Mode Duration: Maximum time that the system may be allowed to control the
engine in a single period. After that delay, the system will
release control of the vehicle, battery voltage and
temperature reading in autonomous mode.
- Validation: this value is the number of seconds that will be needed to activate the
keyless mode
•
Anti-Theft: Choose the input that will allow you to activate the anti-theft mode. This
mode gives you the possibility to take off the key from the ignition switch
and let the engine running. You will need to put back the key to be able to
use the vehicle again, if not the engine will turn off.
- Mom switch: Gives you the possibility to use a momentary switch instead of a
toggle switch to activate the anti-theft mode.
- Delay: Maximum delay for the anti-theft mode. After this delay, the module will go in
keyless mode automatically.
•
Input polarity: These check boxes control the input polarity of all 8 digital inputs of the
system. By default, all inputs are triggered when they sense a positive
12V signal. Selection of the individual inputs in this field will make them
negative inputs (triggered by a negative or 0V signal).