Zone Ozonetech Journey, Руководство по установке

Страница: 19 / 41

INSTALLATION (cont.)
13
2.6 INSIDE TEMPERATURE SENSOR INSTALLATION
:
A. Attach the cable to the vehicle harness as
shown in the picture.
B.
Push cable terminals into the connector
housing and connect the sensor. Same
procedure of the external sensor.
2.7 KEYLESS SWITCH INSTALLATION
:
A. Drill a 19mm hole for the keyless switch in the left
side of the steering wheel. Connect the wires,
install the switch and tag the switch if necessary.
Switch back view.
C1 Connector Harness Keyless Mode Switch
Grey/Black COM (PIN2)
Yellow LED+ (PIN3)
Black LED- (PIN4)
Black N.O. (PIN1)