Zone Ozonetech Journey, Руководство по установке

Страница: 30 / 41

PROGRAMMING …(cont.)
24
•
Digital Inputs: Setup options for digital inputs. This setup section works in conjuncture
with the ‘‘Input polarity’’ section on the ‘‘General’’ thumbnail.
- Selection: Activates the inputs.
- Inversion: Inverts the system’s logic reading of the input. For example, when a positive
input is inverted, it will be triggered when it is not at 12Volts.
- Stop: When a stop input is triggered during idle control, the system resets the timer, shuts
down the engine and return to idling control mode.
- Display: Real time display of system digital inputs. When a digital input is
triggered, the virtual LED will light up green. Remember that any triggered digital
input may perpetually reset the timer of the module and prevent idle control.
3.5.9 START TAB:
•
Enable starting the vehicle (STARTER): This option must be checked to allow
automatic restarting of the engine. The rest of the menu will only be selected by
activating this checkbox.
•
Anti-Starting (Hood): Any of the inputs may be selected as anti-starting hood pin
switches. When triggered, the system will not restart the vehicle.
-
Inversion: Inverts logic level reading of the input. It will consider the hood open
when the signal will be lost (deactivated).
- Reset: If checked, the hood opening will gives back the control to the vehicle and
will reset the module in Idle control mode if key is present and to sleep mode if there
is no key in the ignition.