Zonar V3, Руководство пользователя и инструкция по установке, Страница: 8 / 28

V3 Mounting Plate & Unit
1) Follow all General Guidelines as specified on page 7
2) Mount onto interior flat surface large enough to accommodate
footprint.
3) Suggested mounting areas include horizontally atop
dashboard under an angled windshield free of metallic
obstructions (See Fig. 21-1) and overhead compartments
with a clear non-metallic view of the sky (e.g. under a
fiberglass roof or fairing). Verify placement acceptability
with state DOT/law enforcement prior to installation.
Enclosed areas require an external GPS.
4) Do not install below windows or doors which open to the
vehicle’s exterior to prevent water damage.
5) Avoid mounting equipment in difficult to access areas. Avoid
mounting in areas which do not allow for direct diagnostic
LED viewing.
6) If enclosing in a radio-shielded area (e.g., metallic enclosure)
an external GPS antenna may be necessary for proper
operation and performance.
7) Avoid mounting Zonar Equipment, antennas and wiring near
other radio equipment (e.g.,two-way radios), PA equipment
and high energy electrical sources (e.g., cables, relays,
amplifiers, etc.).
8) Avoid mounting equipment in dirty, dusty, or damp areas (e.g.
near floors and entrance ways).
9) Please take note of:
• GPS (SN) – Found on white sticker on GPS unit
• Vehicle or Asset Number (e.g. Bus #56)
Note: Your Zonar Customer Care Representative or Ground Traffic
Control™ Administrator will need this information.
Fig. 8-1
Orientation and Placement:
1) Horizontal with clear (non-metallic) view of sky
2) Zonar logo towards sky
V3™ MOUNTING PLATE
8