Operation Guide
7
Zolix Instruments Co., Ltd.
http://www.zolix.com.cn E-mail:[email protected]
(7) Go back to the mechanical zero position: set the mode 1 for the axis and press
down the Home button.
(8) Go back to the comparative zero position: set the mode 6 for the axis and press
down the Home button.
(9) Setting the comparative zero position (set by user): set the mode 6 for the axis
and press down FWD or BACK .
Press 1 to set the comparative position of axis X to 0.
Press 4 to set the comparative position of axis Y to 0.
Press 7 to set the comparative position of axis Z to 0.
(10) Setting the pulse:
Press the FWD button of X, Y or Z axis and the stage will move forward.
Press the BACK button of X, Y or Z axis and the stage will move backward.
Note: X and Y or X and Z can move at the same time, but Y and Z cannot.
(11) Stop the stage moving: Pressing down the MODE button of X, Y or Z axis
can stop moving in corresponding direction.
Note
：
The top_speed, init_speed and acc_speed have the function of protecting power losing.
The three parameters will be stored in the internal storage by SC300 motion controller
after setting them. And these parameters will not lose if you restart the SC300.