Zolix Instruments SC300, Руководство по эксплуатации, Страница: 8 / 22

Operation Guide
6
Zolix Instruments Co., Ltd.
http://www.zolix.com.cn E-mail:info@zolix.com.cn
4. Operation Guide
(1) Operating mode introduction
The SC300 has six operating modes which can be changed by MODE and
Number input. The default mode is 1 when power on.
Mode 1 (Absolute position): Displays the absolute position parameters, in unit of step
size. The reference position is mechanical zero.
Mode 2 (Displacement): Displays displacement parameters. Unit is step size.
Mode 3 (Speed): Displays the speed in PPS (pulses/sec).
Mode 4 (Initial speed): Displays the initial speed in PPS.
Mode 5 (Acceleration): Display the acceleration in PPSS (pulses/sec/sec).
Mode 6 (Comparative position): Displays comparative position parameters and the
unit is step size. The reference position is the zero, which is set by user.
(2) Changing the mode: press button MODE continuously, it will range from mode
1 to mode 6.
(3) Setting displacement parameters: set the mode 2 for every axis and input
parameters through Number Input. Then press Enter . Pressing C clears
the last digit number.
(4) Setting top_speed: set the mode 3 for every axis and input parameters through
Number Input. The parameters will be stored in the internal storage, and the
data is not lost when the SC300 is rebooted. Then press Enter . Pressing C
clears the last digit number.
(5) Setting init_speed: set the mode 4 for every axis and input parameters through
Number Input. Then press Enter . The parameters will be stored in the internal
storage, and the data is not lost when the SC300 is rebooted. Pressing C
clears the last digit number.
(6) Setting acc_speed: set the mode 5 for every axis and input parameters through
Number Input. Then press Enter . The parameters will be stored in the internal
storage, and the data is not lost when the SC300 is rebooted. Pressing C
clears the last digit number.