Zolix Instruments SC300 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 22

Zolix Instruments SC300 Скачать руководство пользователя страница 17

Unpacking Procedures Warning

15

Zolix Instruments Co., Ltd.

http://www.zolix.com.cn E-mail:[email protected]

8. Unpacking Procedures

（

1

）

Visual examination

Please do the following inspection for all packing box

Check whether the packaging is intact outside the equipment, there are

situations, such as damage, soaks, out of shape, etc..

Have above-mentioned situation please report immediately to Zolix or

representatives

（

2

）

Unpacking procedures

Please open the packing box and make sure not to use heavy-duty tools or

opens roughly. With the proper tool according to the direction shown on the

packing box so as not to cause inside equipment to be damaged.

（

3

）

After unpacking

Please check equipment appearance for damage or corrosion, etc..

Based on contract and packing list, check specification, mode, and quantity.

Have above-mentioned situation please report immediately to Zolix or

representatives

Please keep the packing box for at least 6 months in order to return or for

transportation.

9. Warning

Warning!!!

Never open the case when it is in operation!

«
...
15
16
17
18
19
...
»

Содержание SC300























Отзывы:

Нет отзывов