Unpacking Procedures Warning
12
Zolix Instruments Co., Ltd.
http://www.zolix.com.cn E-mail:[email protected]
Cooling fan
: fan for heat dissipation of power supply
Special output connector:
interface to light source via standard interface
Power supply interface
：
input 100-220VAC
，
47-60Hz Max 10A
；
Power input /insurance / switch
：
The power switch of the whole power supply is controlled by the switch
Ground
：
The grounding interface of the power supply equipment can avoid the damage of static electricity
and other equipment
External control selection and input
：
When the switch "INT" is selected before the machine is energized, the light source switch is controlled by the
start button of the front panel. When the switch chooses "EXT" before the machine is energized, it is
controlled by the BNC port of the rear panel After the panel is connected with the high level BNC (5V), light
source start, front panel switches lit, the rear panel BNC is low (0V), the light source is shut off, the front panel
switches flashing light fan to work off after 5 minutes, the fan can start again after the closure of the light
source, when the time no, BNC high level is invalid.
4.3 Operation Guide
（
1
）
Standard interface connection light source operation method:
1. Connecting the power supply line, the standard interface connects the light source, closes the master switch,
the front panel displays the voltage current value and the working status indicator.
2. Press the setting / actual current switch to make the Set light on. Press the power inside / outside control
button to the indicator light Local, indicating that the current is adjusted by the panel current adjustment knob.
Power input
/insurance / switch
Cooling outlet
External control
selection and input
Ground
Special output
connector
