manualshive.com logo in svg
background image

CV-TYQ_0809_E_20180329

8

9

Short beep

Turns on

Beep

Turns on

Turns off

Turns on
Turns on

Short beep × 

10 times

Beeps will 

sound,  3 lights 

will turn on and 

"HH" will appear 

on the Display.

Be careful not to repeat 

the boiling process 

without filling the pot 

with water, as the 

Non-Stick Coating may 

discolor and peel off.

The UNLOCK light turns on 

and hot water can be 

dispensed.

Do not unlock and press the 

DISPENSE button if the Inner 

Container is empty.

NOTE

2

Press the                         button to dispense hot water.

Do not swivel the product while dispensing water.

Initially upon boiling or if it has been a while after dispensing, the 

water may not be very hot. Please discard the first cup (of the hot 

water).

Do not attempt to dispense hot water while boiling.

Water may not dispense smoothly for a short period of time after 

boiling.

Be careful as the Body heats up during the Boil and Keep Warm 

modes.

1

Press the             button.

DISPOSE WATER

Dispose leftover water when the product is not in use.

DISPENSE HOT WATER

A safety function to prevent hot water 

from dispensing if the DISPENSE 

button is accidentally pressed.

Automatic Dispense Lock

10 seconds after dispensing, 

the UNLOCK light turns off 

and the Automatic Dispense 

Lock is activated.

Do not tilt or shake the 

product after dispensing. 

Hot water may drip from the 

Spout, causing scalds.

Even if no water is dispensed, the 

Automatic Dispense Lock will be 

activated after about 10 seconds.

1

Unplug the Power Cord 

and detach the Upper Lid.

Take precaution with the steam. 

You may scald yourself.

When detaching the Upper Lid:

1

2

Spout

2

Hold the Handle securely.

Hold the product with both hands and dispose water where indicated 

"EMPTY FROM HERE" on the wall of the Inner Container.

Take precaution with the 

hot water and steam. 

You may scald yourself.

Take precaution as hot 

water may drip from the 

Spout, causing scalds.

When disposing hot water:

Water Removal Area

Do not plug or unplug the 

Power Plug or Appliance 

Plug with wet hands. (Doing 

so may cause short circuit 

or electric shock.)

Do not dispose hot water 

with the Upper Lid in place. 

(The Upper Lid may come 

off, spilling hot water and 

causing scalds.)

Do not allow water to splash 

on the Control Panel, Hinge, 

Handle or Receptacle. 

(Could cause scalding or 

breakdown.)

Take precaution as not 

attaching the Filter properly 

may cause it to fall out 

when dispensing hot water.

Dispose the water at least 

once a day. (Leaving water 

in the Inner Container can 

cause unwanted odor or 

scale build-up.)

NOTE

Make sure the water level is above the REFILL Line 

before pressing the REBOIL/QUICK TEMP button.

Approx. 

3

4 minutes

Approx. 

5

8 minutes

98

C Keep Warm Mode

90

C Keep Warm Mode

The BOIL light turns on when 

the boiling process begins.

(At a room temperature of 23

with the Inner Container filled to 

the Maximum Water Level Line.)

Time required to 

finish reboiling

Reboil mode

Press the             button.

This function is used when reboiling 

water in the Keep Warm mode.

When the Reboil process is completed, 

a melody sounds and the product 

switches to Keep Warm mode.

NOTE

Pressing the REBOIL/QUICK TEMP button twice activates the 

Quick Temp mode. (see pg.12)

Do not attempt to dispense hot water while reboiling.

Water may not dispense smoothly for a short period of time 

after reboiling.

When the Energy-Saving mode is selected, you cannot 

activate the Reboil mode. To start the Reboil mode, cancel the 

Energy-Saving mode once, then press the REBOIL/QUICK 

TEMP button. (see P.12)

Automatic Shut-Off function

Unplug the product. Allow the Inner Container 

to cool. Fill the Inner Container with water and 

plug back in.

When plugged in without filling the Inner Container with water.

When the water level is lower than the REFILL Line and boiling 

has been attempted.

When the Inner Container is empty or the Upper Lid is left open for 

adding water.

When pouring in hot water immediately after plugging in the unit.

The Automatic Shut-Off function activates to shut down power to the 

heater in order to prevent damage from overheating. The Display will 

show "HH" and beeps will sound to alert you that the Automatic Shut-Off 

has been activated. The following conditions may cause activation:

Remedy

Содержание CV-TYQ40











Отзывы: