CV-TYQ_0405_E_20180314
4
5
仮
About 45
degrees
Push
Lid Lock
Indented Area of
the Lid Lock
Water Level Ball
REFILL Line
1
2
3
1
2
Upper Lid
Detach button
A rattling sound you may
hear when opening or
closing the Upper Lid or
when boiling is normal.
(see P.19)
This button must be pressed to
dispense hot water. (see pg.8)
Press this button again for Café
Drip Function.
(see pg.14)
CONTROL PANEL
To Open
To Close
To Detach
PARTS NAMES AND FUNCTIONS
How to Open/Close the Upper Lid
How to Detach/Attach the Upper Lid
Press the indented area of the
Lid Lock with your thumb.
Depress the Upper Lid until it
clicks shut.
Pull the Lid Lock up with your
fingers to open the Upper Lid.
Open the Upper Lid to about
a 45-degree angle.
Push the Upper Lid Detach
button.
Pull the Upper Lid forward
and up at an angle.
1
2
1
2
3
To Attach
Push the Upper Lid back into
place at the same angle.
Lid Lock
Steam Vent
●
Exercise care during the boiling
process as steam emitting from
the Steam Vent is very hot.
Inner Lid
●
If the Inner Lid Gasket hardens, changes
shape, turns white, or otherwise
becomes worn out, please replace it with
a new one. (Separate charge required.)
(see pg.16)
Not doing so may cause hot water to
leak when the product is tilted or tipped
over, resulting in scalding. Steam leaking
from the gap may also cause burns or
product failures.
Inner Lid Gasket
(Consumable Part)
Upper Lid
Press to dispense hot water. (see pg.8, 14)
Sets the Keep Warm temperature.
(see pg.10-11)
LCD display shows the water
temperature and Timer settings.
NOTE: Illustration is for reference only. Actual display will not
show all functions simultaneously during use.
QUICK TEMP light
BOIL light
TEMP SET button
KEEP WARM light
Display
DISPENSE button
UNLOCK light
CAFÉ DRIP light
Power Cord
Cord
Swivel Base
Water Removal Area
Inner Container
Handle
Control Panel
●
Drain water here.
●
Appliance Plug
inserts here.
●
Do not let the Power Cord wrap
around the Main Body when turning.
●
Hot water dispenses from here.
●
For care and use instructions,
see pg.15.
Filter
Maximum Water
Level Line
Hinge
Receptacle
Water Level Gauge
Spout
●
Fill water above the line.
REFILL Line
Body
Twist Tie
●
Please remove the twist tie holding the
Power Cord before use.
●
Do not use the Power Cord bundled up.
Doing so may cause the Power Cord to
become excessively hot, resulting in
malfunction.
Appliance Plug
●
Press buttons down firmly.
●
The Sound Signals and raised dot (
●
) in the center of the
DISPENSE button is provided for those with visual impairment.
Power Plug
REBOIL/
QUICK TEMP
button
UNLOCK button
Starts the Reboil
mode. (see pg.9)
Sets the Quick Temp
mode. (see pg.12)
Use to return to the original
temperature setting when
Energy-Saving mode is
selected. (see P.14)
Also used when performing the
Citric Acid Cleaning (to initiate
cleaning, press this button for more
than 3 seconds). (see pg.16)
ENERGY-SAVING/
TIMER button
Use when setting the
Energy-Saving mode or
Energy-Saving Timer function.
(see P.12-13)
●
The Water Level Ball is not
seen when the water level is
higher than the scale of
Water Level Gauge.
Water Level Ball
(Red Ball)
