CV-TYQ_0607_E_20180329
6
7
Beep
Turns on
Turns off
Turns on
1
2
●
How to set the Keep Warm mode:
see P.10-11
●
How to set the Quick Temp mode:
see pg. 12
※
Approx.
37 minutes
Length of time until the water
temperature reaches about 90
｡
C:
Time required to boil water:
Maximum Water
Level Line
Close the Upper Lid
securely.
To ensure safe
operation while
boiling and to prevent
scalds if the product
is overturned.
Otherwise, may cause electric
shock, short circuit, smoke or
fire.
Be sure to insert the
Power Cord securely.
●
Do not allow the
end of the
Appliance Plug to
get soiled with dust
or come into contact
with metal objects
such as pins.
NOTE
When boiling has completed, a melody
sounds and it automatically switches
to 90
｡
C Keep Warm mode.
Includes approx. 4 minutes to
Dechlorinate.
(At a room temperature of 23
｡
C with the
Inner Container filled to the Maximum
Water Level Line with water temperature
at 23
｡
C.)
※
●
The length of time for the water
temperature to reach 90
｡
C will vary
depending on the temperature of the
room and water.
(At a room temperature of 23
｡
C with the
Inner Container filled to the Maximum
Water Level Line.)
Approx.
1 hour and 10
minutes
When the water
temperature drops to about
90
｡
C, "90" appears on the
Display.
98
｡
C Keep Warm Mode. (see pg.10)
80
｡
C Keep Warm Mode. (see pg.10)
70
｡
C Keep Warm Mode. (see pg.11)
Vacuum Insulation (Non-Electric)
Keep Warm Mode. (see pg.11)
How to set the Keep Warm mode:
The BOIL light turns off, the KEEP WARM
light turns on and "100" appears on the
Display.
●
Add water when the water level is
low during the Keep Warm mode.
(The product automatically begins
heating the water.) If the water level
is still not high enough, it will not
automatically switch to Boil. In this
case, press the REBOIL/QUICK
TEMP button to manually start the
process. (see pg.9)
●
Please follow the instructions below
to prevent the risk of scalding:
・
Do not cover the Steam Vent with a
cloth.
・
Do not touch the Steam Vent or
bring your hands or face near the
Steam Vent.
・
Do not open the Upper Lid while
the BOIL light is on.
・
Do not dispense hot water while it
is boiling.
NOTE
2
Close the Upper Lid and connect the Power Cord.
1
BOIL MODE
Open the Upper Lid and fill
the Inner Container with water
using a pitcher or other ontainer.
●
Do not fill the
Inner Container
directly from a
water faucet or
place the product
on a wet surface
such as a sink. (Exposing
the heating element directly
to water may cause
malfunction.)
●
Avoid splashing water on
the Body or Control Panel.
(May cause malfunction.)
●
Before use,
check the Inner
Lid Gasket for
any deformation.
(May cause
steam leakage.)
NOTE
●
Do not fill over the Maximum
Water Level Line. (Hot water may
overflow from the Steam Vent.)
●
Do not fill the Inner Container with
hot water. (The Automatic
Shut-Off function may be
activated.) (see P.9)
●
Do not fill the Inner Container with
any liquid other than water.
●
Do not use water additives such
as charcoal for water purification
or mineral additives. (Small
particles may get clogged inside
of the product.)
●
If you wish to shorten the
completion time, add less water to
the Inner Container.
The first time
you use the product you
may notice the smell of
plastic. This is normal
and will gradually fade
away.
Fill the Inner Container with water to the Maximum Water
Level Line ( ), and boil water as directed. Once it
reaches a boil, press the UNLOCK button, then press the
DISPENSE button to dispense about 1 liter of hot water in
order to rinse the water route, and dispose the remaining
water. Fill with fresh water.
(Always remember to attach the Filter.)
●
When using mineral or Alkalized Ionic water:
When mineral or Alkalized Ionic water is used, a floating
residue may develop or a milky white substance may form
on the surface of the Inner Container. This is due to the
ingredients in the water and is harmless to your health.
Frequent cleaning is recommended.
●
At your initial use or when
using the product after a long period of storage:
How to change the Information Sound
from a melody to a beep. (see pg.14)
水量ボールの位置で水量が
ひと目で分かります。
Water Level Ball
To monitor the amount of water
you are filling, look at the Water
Level Ball position.
Water
Level
Gauge
Present Water
Level
The Water Level Ball is not
seen when the water level
is higher than the scale of
Water Level Gauge.
It automatically starts the boiling
process.
The BOIL light turns on and the
Display shows the water
temperature in 5
｡
C increments.
