ZOJE ZJ2842-BD, Руководство по эксплуатации

Страница: 71 / 76

58
4.
5.
6.
7.
8.
9.
1.3mm
10.
11.
0.2mm
12.
13.
14. 1-2
15. 39
4. Return the machine head to its original
position.
5. Install the opener .
6. Install the feed dog .
7. Install the needle plate .
8. Install the presser foot .
4.
5.
6.
7.
8.
9.
1.3mm
10.
11.
0.2mm
12.
13.
14. 1-2
15. 39
4. Return the machine head to its original
position.
5. Install the opener .
6. Install the feed dog .
7. Install the needle plate .
8. Install the presser foot .
9. Loosen the set screws and move the rotary hook up and down to adjust so that the clearance between
the matary hook and the needle plate is 1.3mm.
NOTE Do not turn the rotary hook while the set scrwes are loosened,otherwise it will change the timing
between the needle and the rotary hook.
10. Tighten the set screws .
11. Loosen the set screws and move the opener to the left or right to adjust 50 that the clearance
between the rotary hook and the opener is 0.2mm when the opener is pulled as far as it will go
in the direction of the arrow.
12. Tighten the set screw .
13. Install the slide plates .
14. Add 1-2 drops of oil to the left and right rotary hook races .
15. Adjust the rotary hook Iubrication amount while referdng to page 39.
9. Loosen the set screws and move the rotary hook up and down to adjust so that the clearance between
the matary hook and the needle plate is 1.3mm.
NOTE Do not turn the rotary hook while the set scrwes are loosened,otherwise it will change the timing
between the needle and the rotary hook.
10. Tighten the set screws .
11. Loosen the set screws and move the opener to the left or right to adjust 50 that the clearance
between the rotary hook and the opener is 0.2mm when the opener is pulled as far as it will go
in the direction of the arrow.
12. Tighten the set screw .
13. Install the slide plates .
14. Add 1-2 drops of oil to the left and right rotary hook races .
15. Adjust the rotary hook Iubrication amount while referdng to page 39.
4
7
7
6
5
10
15
9
2
2
16