ZOJE ZJ2842-BD, Руководство по эксплуатации

Страница: 22 / 76

9
Machine installation should only be carried out
by a qualified technician. Machine installation should only be carried out
by a qualified technician.
Contact your ZOJE dealer or a qualified electrician
for any electrical work that mat need to be done. Contact your ZOJE dealer or a qualified electrician
for any electrical work that mat need to be done.
The sewing machine weighs approximately 55kg.
The installation should be carried out by two or
more people. The sewing machine weighs approximately 55kg.
The installation should be carried out by two or
more people.
Do not connect the power cord until installation
is complete. The machine may operate if the
treadle is depressed by mistake, witch could
in injury. Do not connect the power cord until installation
is complete. The machine may operate if the
treadle is depressed by mistake, witch could
in injury.
Use both hands to hold the machine head when
tilting it back or returning it to its original
position.If only one hand is used,the weight of
the machine head may causeyour hand to slip,
and your hand may get caught. Use both hands to hold the machine head when
tilting it back or returning it to its original
position.If only one hand is used,the weight of
the machine head may causeyour hand to slip,
and your hand may get caught.
* Do not set up this sewing machine near other equipment such as
televisions, radios or cordless telephones,otherwise such equipment
may be affected by electronic interference from the sewing machine.
* The sewing machine should be plugged directly into an AC wall
outlet. Operation problems may result if extension cords are used.
* Do not set up this sewing machine near other equipment such as
televisions, radios or cordless telephones,otherwise such equipment
may be affected by electronic interference from the sewing machine.
* The sewing machine should be plugged directly into an AC wall
outlet. Operation problems may result if extension cords are used.
* The machine should be carried by the arm by two people as
shown in the illystration.
* Hold the motor cover(A)by hand also so that the pulley does
not rotate.
* The machine should be carried by the arm by two people as
shown in the illystration.
* Hold the motor cover(A)by hand also so that the pulley does
not rotate.
* Hold section(B)with your foot so that the table does not
move,and then push the arm with both hands to tilt back
the machine head.
* Hold section(B)with your foot so that the table does not
move,and then push the arm with both hands to tilt back
the machine head.
1. Clear away any tools,etc. Which may be near the table holes.
2. While holding the face plate with your left hand,gently return
the machine head to the upright position with your right hand.
1. Clear away any tools,etc. Which may be near the table holes.
2. While holding the face plate with your left hand,gently return
the machine head to the upright position with your right hand.