ZOJE ZJ2842-BD, Руководство по эксплуатации

Страница: 7 / 76

This sewing machine should only be used
by operators who have received the
necessary training in safe use beforehand.
The sewing machine should not be used
for any applications other than sewing.
Turn off the power switch at the following
times. The motor will keep turning even
after the power is switched off as a result
of the motor s inertia. Wait until the
motor stops fully before strating work.
When threading the needle.
When replacing the needle and
Bobbin.
When not using the machine and when
leaving the maching unattended.
Attach all safety devices before using the
sewing machine. If the machine is used
without these devices attached. Injury may
result.
Do not touch any of the moving parts or
press any objects against the machine while
sewing, as this may result in personal
injury or damage to the machine.
If an error occurs in maching, or if
abnormal noises or smells are noticed,
immediately turn off the power switch.
Then contact your nearest dealer or a
Qualitfied technician.
If the machine develops a problem.
contact your nearest dealer or a qualified
Technician
Turn off the power switch before carrying
out cleaning. The motor will keep turning even
after the power is switched off as a result of
the motor s inertia. Wait outil the motor stops
fully before starting work.The machine may
operate if the treadle is pressed by mistake,
CAUTION
Sewing
Cleaning
Maintenance and inspection
Be sure to wear protective goggles and
gloves when handling the lubricating oil, so
that no oil gets into your eyes or onto your
skin, otherwise inflammation can result.
Furthermmore, do not drink oil under any
circumstances, as it can cause vomiting and
diarrhoea. Keep the oil out of the reach of
children.
Maintenance and inspection machine
should only be carried out by a qualified
technician.
Ask you dealer or a qualified electrician to
carry out any maintenance and inspection of
the electrical system.
Turn off the power switch and disconnect
the power cord from the wall outlet at the
following thime.otherwise the machine may
operate if the treadle is pressed by mistake,
which could result in injury. However.The
motor will keep turning even after the power
is switched off as a result of the motor s
inertia. Wait until the motor stops fully before
staring work.
When carrying out inspection.
adjustment and maintenance.
When replacing consumable prats such
as the rotary hook.
Any problems in machine operation which
result from unauthorized modifications to the
machine will not be covered by the warranty.
If the power switch need to be lefton when
carrying out some adjustment,be extremely
care full to observe all safety precautions.
When checking the rotary hook lubrication,
do not toutch moving pads such as the rotary
hook,needle and needle bar with your finger
or paper nor push them with other objects.
otherwise injury or damage to the machine
may result.
Use only the proper replacement pads as
specified by our company.
If any safety devices have been removed.
be absolutely sure to re-install them to their
original positions and check that they operate
Correctly before
using the machine.