ZOJE ZJ1900DSS, Руководство пользователя

Страница: 135 / 146

COMPUTER-CONTROLLED HIGH SPEED LOCKSTITCH BAR TACKING MACHINE
- 64 -
Ⅲ
. List of error information
Display Error Name Content of Error Solution
E 10 Pattern NO. Error
The prepared pattern
number is not registered
in ROM or it is set at
unreadable. The pattern
is 0.
Press RESET switch to confirm the
pattern NO. Confirm the content in
memory switch No.201.
E 30
Needle Rod Up
Position Error The needle rod is not at
UP position.
E 40 Sewing Area Over
The sewing area is over
the limit.
Press RESET switch to confirm the
X/Y scale rate
Activating condition: software’s
E 43 Enlargement Error
The sewing pitch is
beyond 10mm.
Press RESET switch to confirm the
X/Y scale rate
Activating condition: software pattern
calculation error
E 50 Pause
Press the RESET switch
while sewing machine
is running. The machine
pauses.
Restart or return-to-origin after
pressing RESET switch for
thread-trimming.
E 221
Grease Replenishing
Warning Error
Sewing machine has
stopped since the time of
replenishing the
designated place with
grease has come.
Immediately perform replenishing with
grease and set the memory switch No.
245 to “0”with Reset.
E 302 Head Tilt Error
Head tilt detection
switch is turned ON.
The sewing machine cannot be
operated with the head tilted. Return
the sewing machine head to its proper
position.
E 45
Pattern Data Error
The pattern data cannot
be adopted.
Turn OFF the power and check the
data ROM.
pattern calculation error
Spindle parking position error,may
be the cause of spindle drive,may
also be caused by human ratation.
turn the wheel and return the needle
rod to theupper position.