5
© Copyright 2022 Zoeller
®
Co. All rights reserved.
IMPORTANT
To minimize risk of air lock, intake of DC pump must be set
above intake of primary pump.
SK3182
FIGURE 1
OUTLET
PRIMARY PUMP
1" MIN.
IMPORTANT: OFF LEVEL
OF FLOAT ASSEMBLY
MUST BE HIGHER THAN
DC BACKUP PUMP
FIG. 1
DC PUMP INSTALLED IN LINE WITH SUBMERSIBLE PUMP
BATTERY BOX
AQUANOT FIT CONTROLLER
OUTLET
CONTROLLER
HI-WATER
REED SENSOR
1-1/2 SCH 40 PVC PIPE
X 10" (254 mm) LG.
1-1/2 SCH 40 PVC TEE
NOTE: CHECK VALVE SCREWS
INTO PRIMARY PUMP DISCHARGE.
HAND-TIGHTEN ONLY.
WEEP HOLE MUST BE VISIBLE.
OPERATIONAL
FLOAT SWITCH
DC PUMP
CLAMP
HIGH WATER
REED SENSOR
CHECK VALVE O-RING
PRIMARY PUMP
CLAMP
AQUANOT FIT
DC PUMP O-RING
EXPLODED VIEW - PUMP SYSTEM
FIGURE 2
SK3223
TYPICAL INSTALLATION
