Zodiac PF Premium 6M, Инструкция по установке и эксплуатации

Страница: 8 / 22

H03620
‐
00.B5.EN – 2011/11
7
Symbol Designation steady flashing
defrost indicator Defrost in progress /
On/off button
button to set and confirm parameters
value setting buttons
3.1.1 Reading and changing parameters
3.1.2 Locking and releasing the key pad
Press and for 3 seconds: or
3.2 Starting the device

check that no tools or other objects have been left inside the device,

the access door for technical components must be fitted,

set the by
‐
pass and setting valves (see § 2.4) as follows:
- valve 1 completely open,
- valves 2
‐
3
‐
4 & 5 closed.
The incorrect setting of the by ‐ pass valve can lead to the malfunctioning of the heat pump.

switch on the filter system,

progressively close valve 1 in order to increase the filter pressure to 150 g (0.150 bar) ,

open valves 2, 3 and 4 completely, then half open valve 5 (see §2.4) (the air accumulated in the heat pump
condenser and in the filter circuit is then bled),
If valves 4 and 5 are not fitted, open valve 1 completely, and half close valve 3.

power
‐
up the heat pump,