ZMC416BE Motion Controller User Manual V1.5
→
Cable Requirements:
Twisted pair shielded wire, and shielded cable grounded.
3.3.2.
Basic Usage
(1)
Please follow the above wiring instructions for correct wiring.
(2)
After power on, please use ETHERNET, RS232 (default parameter, it can be connected
directly) and RS485 (default parameter can be directly connected, one adapter is
needed for hardware) to connect to ZDevelop.
(3)
Please use the "ADDRESS" and "SETCOM" commands to set and view the protocol
station number and configuration parameters, see "ZBasic Programming Manual" for
details.
(4)
Correctly set the relevant parameters of the third-party equipment according to their
respective instructions to match the parameters of each node.
(5)
When all is configured, it can start to do communicating.
(6)
Communication data of RS
232 can be directly viewed through “ZDevelop / Controller
/ State the Controller / CommunicationInfo”.
Содержание ZMC416BE
Страница 1: ......