ZMC408CE Motion Controller Hardware Manual V1.5
3.6.
ETHERNET
ZMC408CE motion controller has one ethernet port, and it supports MODBUS_TCP
protocol and custom communication, the default IP address is 192.168.0.11. The pin
definition is as follows:
The Ethernet port of the controller can be connected to a computer, HMI, etc. through
an Ethernet cable, and using point to point connection method. The schematic diagram
is as follows:
The controller can also be connected to the interchanger through an Ethernet cable,
and then use interchanger to connect to other devices, then multi-point connection can
be achieved. The schematic diagram is as follows:
Содержание ZMC408CE
Страница 1: ......