Laser cutting and engraving workflow
140
• Using the machine by unqualified personnel may lead to damage to health and /
or damage to the machine. ZMorph VX machine and Laser PRO toolhead are not
toys and can’t be used by children without adult supervision,
• If you notice any abnormalities in the operation of the machine, stop the process
immediately with the reset button (red button on the right side on the front panel
of the machine) and contact the ZMorph Technical Support,
• Do not use a defective machine under the threat of losing the warranty,
• When using the ZMorph VX machine with Laser PRO, both the staff and the by-
standers (if any around) must always wear safety goggles, failing to comply with
this recommendation may result in damage or loss of sight,
• Never open any covers under which the machine components are hidden with
the power supply connected. If it is necessary to repair or inspect components,
please contact the official ZMorph Technical Support,
• Before starting work on the machine with Laser PRO, make sure that the ma-
chine's surroundings (work room) is closed and that there is no possibility of
unauthorized access without proper eye protection.
2.
Safety at work with Laser.
• Any exposure to laser emission may cause physical burns or damage to your
eyesight. It is extremely important to use the device in a safe manner and in ac-
cordance with the instructions,
• The ZMorph VX machine on which the Laser PRO is mounted and working can
not be left unattended,
• A fire extinguisher with valid approval should always be located as close as pos-
sible to the machine to which the laser is connected,
• The use and maintenance of the machine must always be carried out in a man-
ner consistent with the description in the manual,
• Make sure that the room ventilation works correctly,
• Install the workpieces and tools in the correct places in a safe manner. Avoid col-
liding the workpiece with the machine. Otherwise, the machine may be damaged,
• Check that there are no obstacles in the work area before starting work,
• During the change of the workpiece, stop all operations,
• Do not touch electrical parts with wet hands,
• Do not place your hands in the working area during processing.
Содержание VX
Страница 86: ...3D printing workflow 86 Lattice Light Solid...
Страница 97: ...3D printing workflow 97 solid solid PVA support dedicated for Dual PRO Extruder tree...
Страница 163: ...zmorph3d com...