Zmorph VX, Руководство по эксплуатации продукта

Страница: 65 / 163

3D printing workflow
65
Wait until the extruder
stops printing and lifts
itself up.
Tap the "HEATING" menu
and check if the extruder
has the right tempera-
ture.
Tap the "LOAD/UNLOAD"
menu.
Tap the upper arrow with
LEFT description on the
screen to remove 80
mm of the filament. At
first, extruder will load 40
mm to prevent clogging.
Repeat if needed.
Tap the upper arrow with
RIGHT description on
the screen to remove 80
mm of the filament. At
first, extruder will load 40
mm to prevent clogging.
Repeat if needed.
Insert new filament gen-
tly into the guide.
Tap the "Settings" menu. Choose "MORE". Choose "Filament
Change".
Dual PRO Extruder
This function allows you to change the filament during the printing process. The new
filament must be of the same material as the new one (PLA/PLA) because the tempera-
ture of the extruder will be the same as for the filament that was there before.