ZLP Electronics DigiMaster Pro3, Руководство пользователя

Страница: 5 / 30

When you receive your Pro3 the first thing to do is install it and check that Windows has installed it
correctly. To do this, follow the simple steps below.
[1] Turn on the PC.
[2] Run “Device Manager”.
This is a basic PC “house keeping” operation and we do have a
guide to using device manager on our
website for those who are unfamiliar with device manager.
[3] Unplug ALL cables from the interface.
[4] Plug in the USB cable to the interface.
[5] Plug the other end of the USB cable into your PC (powered USB hub).
[6] WAIT, Windows will recognise the interface and start installing drivers.
If your version of Windows has the drivers then the installation will be automatic and be fairly quick.
Windows will install drivers for the built in Hub, for the built in soundcard, and for the built in
comports (3).
IF at any time Windows asks you for drivers, simply allow Windows to search the net and you will get
the very latest drivers.
[7] Windows will of course add the devices according to your PC and so some parameters may be
different but the devices shown below will be present.
When Windows has finished installing drivers, device manager will contain the following entries;