ZLP Electronics DigiMaster Pro3, Руководство пользователя

Страница: 25 / 30

The other buttons;
Tx: Puts the interface into Tx mode and data in the Tx window will be sent to the interface for
transmission. If there is no data to be transmited the interface will enter “Tx standby” mode and will
immediately transmit any data entered into the Tx window.
Rx: Puts the interface into Rx mode.
CQ1: Puts the contents of the text file “cq1.txt” into the Tx window.
CQ2: Puts the contents of the text file “cq2.txt” into the Tx window.
QRZ: Puts the content of the file “qrz.txt” into the Tx window.
Station: Puts the contents of the text file “station.txt” into the Tx window.
Ex1: Puts the contents of the text file “ex1.txt” into the Tx window.
Ex2: Puts the contents of the text file “ex2.txt” into the Tx window.
RY OFF: Not implemented in this version of software.
73’s: Puts the contents of the text file “73.txt” into the Tx window.
Name: Enter the name of the person you are in contact with (use cu-n-paste).
Call: Enter the callsign of the person you are in contact with (cut-n-paste).
RST: the RST of the person you are in contact with (cu-n-paste).
The Counter window: Starts at “1” and increments or decrements hen you click “+” or “-“.
The contents of any of the above windows can be sent to the “Tx” window by clicking on the
appropriate button.
BTU: Sends “BTU”
de ME: Sends the contents of a text file called “deme.txt” – you can edit this as appropriate.
Him de Me: Sends the contents of the “Callsign” window followed by the contents of a text file called
“deme.txt”
Send Count: Sends the content of the “Count” window.
QSL: Sends the text “QSL”
USR: Sends the contents of the baudrate window to the interface (must be in the range 10-600).