CANFDNET-400U
High-performance Four-channel CANFD Bus-to-Ethernet Converter User Manual
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
39
User Manual
Figure 5.3 Serial port occupied Figure 5.4 Device verification failed
If the "Failed to open serial port" message appears, as shown in Figure 5.3, the
serial port of the currently selected PC is unavailable or already occupied. If the "Device
connection verification failed" message appears, check whether the converter has entered
configuration mode (if the converter is working in "normal operation" mode, the software
will also display the "Device connection verification failed" message), and check whether
the serial port on the selected PC is connected.
5.1.3 Setting the Save Parameters
After the connection is successful, configure the converter parameters. After
selecting the required parameters, click the "Save Configuration" button to save the
parameters to the converter, as shown in Figure 5.5.
After the configuration is complete,
click the "Disconnect" button, or close the configuration tool. Otherwise, the configuration
tool will occupy the serial port.
Figure 5.5 Saving the configuration
5.2 Communication Test
After the configuration is complete, set the "Configuration Switch" to "ON"! In this way,
you can start the normal working mode. In the normal working mode, the converter can
start normal conversion.
