SpeedFace-V5L Series
User Manual
P a g e
| 81
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Duress Options Settings
Once a user activates the duress verification function with a specific authentication method(s), and when
he/she is under coercion and authenticates using duress verification, the device unlocks the door as usual.
At the same time, a signal is sent to trigger the alarm as well.
On the
Access Control
interface, tap
Duress Options
to configure the duress settings.
Function Description
Function Name
Description
Alarm on Password
When a user uses the password verification method, an alarm signal will be
generated, otherwise there will be no alarm signal.
Alarm on 1:1 Match
When a user uses the 1:1 verification method, an alarm signal will be generated,
otherwise there will be no alarm signal.
Alarm on 1:N Match
When a user uses the 1:N verification method, an alarm signal will be
generated, otherwise there will be no alarm signal.
Alarm Delay (s)
Alarm signal will not be transmitted until the alarm delay time is elapsed. The
value ranges from 1 to 999 seconds.
Duress Password
Set the 6-digit duress password. When the user enters this duress password for
verification, an alarm signal will be generated.
