SpeedFace-V5L Series
User Manual
P a g e
| 62
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name
Description
QR Code Binding
Use the ZSmart APP client to scan the QR code to connect and bind the device.
Intercom Server
Setting
Set the IP address and port number of the intercom server.
Server Address:
Enter the sever installation IP address.
Server Port:
It is the service port set during installation (not the ADMS port).
Calling Timeout (s)
If the call is not answered within a specified time, it exits to the main interface.
Security Settings
Tap
Security Settings
on the
System
interface.
Function Description
Function Name
Description
Security Mode
When enabled, user information verification has a high level of security. This
function can be enabled or disabled via the menu interface. When switching on
and off, there are security prompts. All data will be deleted and the device will be
restarted after confirmation.
Note:
After turning on the security mode, the product will forcibly enable the
function of returning to the standby interface when the menu times out by
default (default 60s). It does not support disabling in security mode, but it does
support disabling in non-security mode. To configure, go to
Personalize
>
User
Interface
>
Menu Screen Timeout(s)
.
