CY3280-20X66 UNIVERSAL CAPSENSE CONTROLLER KIT
QUICK START GUIDE
Remove CY3280-20x66 Universal
CapSense Controller Board from package.
Connect the CY3280-SLM board (to be
purchased separately) to the P2 connector.
Ensure that shunt is placed between 5 V
and VCC of jumper J1. Plug in the USB
cable to the CY3280-20x66 Universal
CapSense Controller Board.
Touch the CapSense button or slider. The
respective LEDs lights up.
Insert the kit CD into the CD drive of your
PC. Install the kit contents, PSoC Designer,
PSoC Programmer, and Bridge Control
Panel. After the kit contents and software
are installed, PSoC Designer can be used
to customize existing example projects or
create new ones.
1
2
3
4