RevFace15
User Manual
P a g e
| 13
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Recommendation for authenticating a face
Ensure that the face appears inside the guideline displayed on the screen of the device.
Sometimes, authentication may fail due to the change in the wearing glasses then the one used
while registration. In such a case, you may require authenticating your face with the previously
worn glasses. If your face was registered without glasses, you should authenticate your face
without glasses further.
If a part of the face is covered with a hat, a mask, an eye patch, or sunglasses, authentication may
fail. Do not cover the face, allow the device to recognize both the eyebrows and the face.
Standby Interface
3.3
After connecting the AC adapter, the following standby interface is displayed:
Tap to enter the User ID input interface.
When there is no Super Administrator set in the device, tap to go to the menu.
After adding a Super Administrator on the device, it requires the Super Administrator’s verification
before opening the menu functions.
Note:
For the security of the device, it is recommended to register a super administrator the first time
you use the device.
