RevFace15
User Manual
P a g e
| 18
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
3.5.2
Multi-face Verification
1:N Multi-face Verification
1.
Conventional verification
In this verification mode, the device compares the collected multi-person facial images with all the face
data registered in it. The device supports verification of up to 4 people at once. But the number of
verification results to be displayed on the right side can be configured. The following image shows the
pop-up prompt of a successful comparison result.
Tap
System
>
Face
>
Face Identifying Settings
>
Identifying Mode
>
Multi-face Identifying
>
Count
to Display
to set the number of the verification results to be displayed.
Note:
The Count to Display can be set between 1 to 4.
2.
Enable mask detection
When the user enables the
Enable mask detection
function, the device identifies whether the user is
wearing a mask while verification or not. The following are the popups of the comparison result prompt
interface.
