RevFace15
User Manual
P a g e
| 40
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Adding WiFi Network Manually
The WiFi can also be added manually if the required WiFi does not show on the list.
Note:
After successfully adding the WiFi manually, follow the same process to search for the added
to view the process to search the WiFi network.
Advanced Setting
On the
Wireless Network
interface, tap on
Advanced
to set the relevant parameters as required.
Function Description
Function Name
Description
DHCP
Dynamic Host Configuration Protocol (DHCP) dynamically allocates IP addresses
to network clients. If the DHCP is enabled, then the IP cannot be set manually.
IP Address
The IP address for the WiFi network, the default is 0.0.0.0. It can be modified
according to the network availability.
Subnet Mask
The default Subnet Mask of the WiFi network is 255.255.255.0. It can be modified
according to the network availability.
Gateway
The default Gateway address is 0.0.0.0. It can be modified according to the
network availability.
Tap on
Add WIFI Network
to add
the WIFI manually.
On this interface, enter the WiFi
network parameters. (The added
network must exist.)
