ZK Technology MA300, Руководство пользователя

Страница: 6 / 46

User Manual V1.1
2
1.2 Instruction for Card Swipe
Integrated with a non-contact RF card reader module, this device supports
the ID cards and MIFARE cards (optional and only used as ID cards). By
offering multiple verification modes such as fingerprint, RF card and
finge RF card verification, this device can accommodate to diversified
user needs.
Swipe your card across the sensor area after the voice prompt and remove
your card after the device has sensed it. For the swipe area, see
2.2 Product
Appearance .
1.3 Precautions
Protect the device from exposure to direct sunlight or strong beam as strong
beam greatly affects the fingerprint collection and leads to fingerprint
verification failure.
It is recommended to use the device under a temperature of 0–50°C so as to
achieve the optimal performance. In the event of exposure of the device to
the outdoors for long periods of time, it is recommended to adopt sunshade
and heat dissipation facilities because excessively high or low temperature
may slow down the device operation and result in high false rejection rate
(FRR) and false acceptance rate (FAR).
When installing the device, please connect the power cable
after connecting
other cables. If the device does not operate properly, be sure to shut down
the power supply
before performing necessary inspection. Note that any
live-line working may cause damage to the device and the device damage
arising out of live-line working falls beyond the scope of our normal warranty.
For matters that are not covered in this document, please refer to related
materials including the installation guide, access control software user
manual.