Zizito BARRON, Руководство пользователя

Страница: 11 / 82

11
EN
Unfold the stroller
Front & rear wheels assembly
Seat assembly
Unfold the seat, then install the
hood visor on the hood by zip.
Align the seat with the anchors
on the side of the chassis and
push them together until they
install securely. You should hear
a clear “click”. Extend the hood to
its opening condition and adjust
the hood freely according to your
desired position.
P
lease always read all the instructions provided carefully before use, and keep the care and maintenance
instruction for further reference. Important! Keep for future reference.
Lift the pushbar
Take out the chassis from the
carton, unfold the chassis firstly
by stepping on the rear tube and
pulling upward on the handle bar,
then lean forward until the folding
hinge is fully engaged. The folding
mechanism will lock into place when
the legs are fully extended. You
should hear a clear “click”.
Install front & rear wheels
Push the wheels into the wheel
housing until they lock into places.
You should hear a clear “click”.
NOTE: Pull the wheels to ensure
that they are securely attached to
the chassis. Fix the direction of
front wheels. Put the front wheels
in forward direction and press down
the fixer. You should hear a clear
“click”. Pull up the fixer and wheel
can be flexible.
Rеmove the front & rear wheels.
Push release button on the side of
the front wheel hub and remove the
front wheel. Pull the release pin on
the side of the rear wheel hub and
remove the rear wheel.
RELEASE
PIN