Zirkon zahn P4000 PRINTER, Руководство по эксплуатации и обслуживанию

Страница: 47 / 80

47
CHAPTER
CLEANING
ZIRKONZAHN – P4000 PRINTER OPERATION AND MAINTENANCE MANUAL – VERSION: 20/09/2022
ATTENTION: When pouring the remaining resin back into the bottle, it is important to
WUGVJGſNVGTVQCXQKFVJCVJCTFTGUKPRCTVKENGUCTGOKZGFYKVJVJGNKSWKFTGUKP
Clean well the resin vat after printing: during the next printing process, when the building
RNCVGOQXGUFQYPYCTFEWTGFTGUKPRCTVKENGUOKIJVRWPEVWTGVJGP('2ſNOECWUKPITGUKP
spillage and damage to the LCD display. Wash the vat using water or alcohol depending
on the resin used.
If the resin is left in the vat overnight in order to start the process the day after, colour pigments
and other chemical components will settle at the bottom: mix the resin in order to remove the
layers, which would block the curing light preventing the printing process.
NOTE: It is recommended to always empty the resin vat to avoid printing problems.