24
Finishing
Glue the deck to the hull.
Sand all around and round all edges slightly.
Seal the outside with 2 coats of sealer.
At this point, everything should have 2 coats of
sealer.
If not, get it done now.
I
f you are painting, it’s easier to paint the stack
and inside of the wheelhouse before you glue
them to the deck.
Sand the entire boat with 220, then 400 grit
paper.
Don’t forget the stack, wheelhouse and keel
shoe.
Apply paint and allow to dry
Determine where you want to position the
wheelhouse and glue it in place.
We like to use an automotive clear coat for
maximum protection from our buddies…
Good luck and happy boating!
Содержание Tugster
Страница 25: ...25...
