Zippkits Tugster, Инструкция по сборке

Страница: 12 / 25

12
You can seal this as soon as you are finished.
Hatch
The hatch is assembled from 5 pieces. 4 of
them form the lip that goes over the deck that
you made earlier.
Glue the 2 long strips on top of the hatch.
Note that all strips are glued to the top of the
hatch, not the side.
Be sure to use your square, and glue all 4 strips
in place.
The shorter strips go between the longer ones.
Make double sure they are all square.
When cured, sand if necessary and then seal
both sides.