Zippkits Tugster, Инструкция по сборке

Страница: 10 / 25

10
When cured, sand the bottom all around. You
may round the corners slightly, but not much.
This is really starting to look like something now!
Seal the bottoms of the battery trays.
When cured, glue in place so that the front of
the tray is nearly flush with the front of bulkhead
3.
Glue the tray sides in place.
Take this time to seal the inside of the hull with
2 coats of sealer. This can be epoxy, lacquer,
polyurethane, shellac or just about any oil based
paint or sealer.
Also seal the radio tray. DO NOT GLUE IN
PLACE YET.
Let’s get the stuff put in to make her go!