ZIPPER MASCHINEN ZI-BAT50, Руководство пользователя

Страница: 19 / 29

STORAGE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  19
ZI-BAT50 / ZI-BAT60
17 STORAGE
Store the machine in a dry, closed place out of reach of children. Empty the water collection tank and
dry it carefully. Check that the machine is in perfect condition and cover it.
18 CLEANING
N O T I C E
The usage of certain solutions containing ingredients damaging metal surfaces as well
as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild detergent
18.1 Disposal
Do not dispose the machine in residual waste. Contact your local authorities for information
regarding the available disposal options. When you buy at your local dealer for a replacement
unit, the latter is obliged to exchange your old.
19 TROUBLE SHOOTING
W A R N I N G
Danger due to electrical voltage! Handling on the machine can lead to serious
injuries or death. Always disconnect the machine from the power supply and secure it
against unintentional reconnection before carrying out maintenance or repair work!
Many possible trouble causes can be eliminated in advance if the machine is properly connected to the
mains supply. If you feel unable to carry out necessary repairs properly and/or do not have the
required skills to do so, always consult a specialist to solve the problem.
Trouble Possible cause Solution
Motor does not start  No power supply  Check power supply
 Fuses defective  Change fuses
 Main cable defective  Change main cable
 Water tank full (E4)  Empty water tank
 Humidity of the room air too
high
 Set humidity value
 Humidity sensor defective (E3)  Change humidity sensor
 Refrigeration circuit sensor
defective (E5)
 Change Refrigeration circuit
sensor
Only less condensation or no
water
 Room temperature or humidity
of air out of the working range
 Check room temperature or
humidity of air and set it
 Air filter contaminated  Clean air filter
 Air in/outlet blocked  Place the machine in another
location
 Doors and/or windows open  Close doors and/or windows
Machine shuts down in
continuous operation with
drain hose
 Drain hose kinked or wound up.  Re-route the drain hose to allow
the water to flow out unhindered
 Water frozen in the hose  Take precautions to avoid water
freezing
Water flows out of the machine  Leakage or the water tank  Change water tank
 Drain hose is not into the
opening of the water tank
 Place the drain hose into the
opening of the water tank
Unusual noise or vibrations.  Machine is placed on an uneven
floor
 Place the machine on an even
floor.