13
808081 v1.01 06.21 Industrial Tap Instructions
Commissioning
Legacy mode must be enabled for the Industrial Side Touch or Industrial Top
Touch tap to function with HydroTap G4 or G5 Command Centres.
98
°C
BOILING
12:12 PM
.0
ENTER CURRENT PASSCODE
12:12 PM
1 2 3
5 6
7 8 9
0
Enter 5-pin
passcode
4
[ ]
From the main menu, press “Product Serial
No”. Note the 13-digit serial number.
_ _ _ _ - _ _ _ _ - _ _ _ _ _
_ _ _ _ - _ _
* *
- _ _
* * *
The indicated digits of the Serial Number
(digits 7, 8, 11, 12, 13) comprise the 5-digit
passcode. Contact Zip service if further
assistance is required.
Press “Service Technician”. Enter the
passcode obtained as above, followed by
ENTER CURRENT PASSCODE
12:12 PM
1 2 3
5 6
7 8 9
0
Enter 5-pin
passcode
4
.
Select “Resets/Install”.
Select “Legacy Tap”.
Select “Enable”.
Press “Home” to return to the home
screen.
[ ]
[ ]
[ ]
[ ]
Refer to the HydroTap Command Centre installation
instructions for commissioning before proceeding.
MAIN MENU
12:12 PM
General
Settings
System
Settings
Safety &
Security
Energy
Saving
Info &
Logs
Product
Serial No.
Register
Product
Service
Technician
[ ] [ ]
