10
808081 v1.01 06.21 Industrial Tap Instructions
3
Prepare the drainage point
4
• Locate pipe branch attachment
temporarily in position on vertical pipe,
upstream from a drain trap.
• Mark spigot hole position, remove
attachment & drill out 13mm diameter.
• Apply sealant to spigot groove.
• Ensuring spigot is pointing upwards, snap
attachment into place over hole.
• Secure with worm drive clamps.
• Attach drain pipe to spigot.
• Secure with worm drive clamp.
Sealant
groove
Flexible pipe from Font
Pipe branch attachment
Worm drive clamps
Pipe branch
attachment
!
Position upstream of a drain trap.
Drain pipe must have constant fall.
Ensure there are no kinks or sags.
Secure Font & Tap, attach drain
(underneath)
• Secure flexible drain pipe (not supplied) with a
worm drive clamp.
• If required, use an elbow fitting under the Font
to prevent hose kinks.
Mounting
nut &
washer
Flexible
drain pipe
Worm drive clamp
Spider clamp
Fixing washer
Fixing nut
Font Installation (optional)
• Test for leaks and re-seal if
required.
