Page 18 of 20
HydroTap Installation and Operating Instructions
The use of this crossed out wheeled bin logo indicates that this product needs to be
disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for
the collection and recycling of unwanted electrical and electronic equipment. Outside
of the EU it will be necessary to dispose of this product at your local community waste
collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this product
correctly. Please contact your local city council for collection centre details
End of life disposal
Boiling Water Isolation
The HydroTap if equipped with a safety mode that allows protection against
accidental operation by Infirm or disabled persons.
1. On the LCD scroll through the menu to Hot Isolation.
2. Press Adjust
<
to activate.
3. Now go to the Tap Head assembly and press the Safety Lock (3) three
times rapidly, the LED’s will scroll from left to right (3) three times. This
operation confirms the activation.
4. This isolates the boiling tap only. The LCD shows isolation mode is active.
5. To de-activate, press the Safety Lock (3) three times rapidly, the LED’s
will scroll from right to left (3) three times. This operation confirms
de-activation.
6. The LCD will show Normal Operation.
7. If de-activation mode is required, de-activate by scrolling through the
menu and selecting de-activate when Hot isolation Mode is displayed on
the screen.
Set the Boiling & Chilled water dispensing times
The ability to change the maximum dispensing time for both the Boiling and
Chilled water has been introduced. The default settings for the maximum
dispensing times is 15 secs. The ability to change both the Boiling and Chilled
dispensing times between 5 and 15 secs, in increments of 1 sec, is accessible
through the Menu screen on the LCD.
Scroll through the Menu until the Dispense Hot screen is displayed, then use
the adjust buttons to set the required dispensing time for the Boiling water.
Follow the same procedure to access the Dispense Cold (for Chilled water)
screens.
