HydroTap Installation and Operating Instructions_Commercial_BCH 4in1_BH 3in1_October 2012_V1.05
Page 4 of 24
Contents
Installation Check List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Read These Warnings First . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8
Special Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 13
Step A - Installing the HydroTap . . . . . . . . . . . . . . . . . . . 8
Step B - Installing / Connecting the Mixer Tap . . . . . . . . 9
Step C - Installing the Undersink Unit . . . . . . . . . . . . . . . 9
Step D - Connecting the Hydrotap . . . . . . . . . . . . . . . . 10
Step E - Connecting an External Filter . . . . . . . . . . 10 - 11
Step F - Connecting the Water Supply . . . . . . . . . . . . . . 12
Step G - Testing and Commissioning. . . . . . . . . . . . . . . 12
Step H - Set Point Adjustment . . . . . . . . . . . . . . . . . . . . 13
Font Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Operating the Mixer Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Operating the Hydrotap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
External Filter Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Internal Filter Replacement . . . . . . . . . . . . . . . . . . . . . . . . 16 - 17
Setting the Energy Saver Timer . . . . . . . . . . . . . . . . . . . . . 17 - 18
Auxiliary Fan Attachment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Boiling Water Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setting Boiling & Chilled Dispensing Times . . . . . . . . . . . . . . . . 19
Cleaning and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3-in-1 Installation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4-in-1 Installation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 - 22
Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Warranty / Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . 24
Hydrotap BH, 3-in-1 and BCH, 4-in-1 models employ the use of selected Hydrotap B and BC assemblies, which have
been factory modified to accept a secondary mixer tap. The mixer tap is connected so that it draws water directly from
the cold water mains as well as from the boiling water storage tank. In this way the combination of the two taps will
allow the user to select water at 4 different temperature ranges. (see estimates below)
For BCH, 4-in-1 models, the main Hydrotap outlet will deliver Boiling and Chilled water and the secondary mixer tap
outlet will deliver Hot and Cold water. Whereas the BH, 3-in-1 models will perform exactly the same, except there is no
chilled water option.
Product Description
NOTE:
Read all instructions and precautions before
proceeding. This unit must be installed in accordance
with water supply byelaws, current IEC regulations
and relevant local authority byelaws.
The estimated temperature ranges will be:
Boiling water:
68°C - 98°C
Mixed water:
From ambient up to 20°C above ambient
Cold water:
Ambient. (Approx. 15°C - 20°C)
Chilled water:
5°C - 15°C
NOTE:
Read all instructions and precautions before proceeding.
If in doubt, or need further guidance, please call Zip on 0845 6 005 005.
Please leave these instructions with the end user after installation.
This unit must be installed in accordance with water supply byelaws, current IEE regulations and relevant local authority byelaws.
