Page 15 of 24
HydroTap Installation and Operating Instructions_Commercial_BCH 4in1_BH 3in1_October 2012_V1.05
Blue Chilled Water Light
On all the time:
This indicates that the temperature of the chilled water is within the usable
temperature range.
Flashing slowly :
This indicates that the chilled water is not at the right temperature. Wait up to
20 minutes. When the chilled water is at the right temperature, the light will
stop flashing. Note: The Zip HydroTap is designed to dispense chilled water in
the temperature range 5°C to 15°C.
During heavy usage, the temperature can rise out of this range.
Red Boiling Water Light
On all the time:
This indicates that the boiling water is ready.
Flashing slowly :
This indicates that the boiling water is below usable
temperature.
Filter Change Light Off:
This indicates the filter is operating within its normal
specified life span.
Filter Change Light Flashing slowly :
The light will flash slowly when the
filter is due for replacement and the LCD will show “Filter Change”. Refer to
“Replacing the filter” section of this document.
Boiling Water Lever
Depressing the “Red” lever allows dispensing of Boiling water.
Pulling up the Red lever allows the tap to operate in a “no-touch” mode. Water
will flow
from between 5 and 15 seconds (This is user adjustable). To reset,
return the handle to the “Off” position and repeat the step. The lever has to be
manually returned to the “Off” position.
Chilled Water Lever
Depressing the “Blue” lever allows dispensing of Chilled water. Pulling up the
Blue lever allows the tap to operate in a “no-touch” mode. Water will flow
from between 5 and 15 seconds (This is user adjustable). To reset, return the
handle to the “Off” position and repeat the step. The lever has to be manually
returned to the “Off” position.
Child Safety Lock (4 in 1)
The child safety lock can be activated to prevent boiling water flowing if the
hot lever is inadvertently activated.
To activate
: First press the safety lock then depress the Blue Chilled water
lever for a period of approximately ten seconds. The safety lock indicator light
will now be illuminated.
To de-activate
: First press the safety lock then depress the Blue Chilled water
lever for a period of approximately ten seconds. The safety lock indicator light
will now extinguish.
To operate when the lock is ON
, depress both the Red lever and the safety
lock simultaneously.
Child Safety Lock (3 in 1 )
To activate the child safety lock , go to the LCD display, using menu
<
or <
scroll to the Safety Lock display. To turn ON adjust
<
to turn OFF adjust <
button. After about 10 seconds the screen will default to the selected mode.
When activated the LED on the safety lock will be illuminated. If de-activated
the LED will be OFF.
To operate when lock is ON,
depress both the Red lever and the safety lock
simultaneously.
Note:
On the Boiling only models
the Chilled LED is blank.
Boiling
Chilled
Filter Change
Operating the HydroTap
Press or pull lever
Child safety Lock
