Page 18 of 28 801912UK - Commercial Boiling, chilled and sparkling user manual - Sept 2016- v2.04
G. Settings
3.
LCD Screen operation - Section G
g I
nstructions
•
Press the [MENU] button for main
menu.
•
Press the [Settings] button.
•
Enter your 4-digit password and
press [Enter].
•
Once the password has been set
you will need to enter the
password to access the settings
screen. If you have forgotten the
password see page 16, LCD
screen operation - section E
security.
In the settings mode you will be able
to access the following:
•
Press the [MENU] button.
•
Press the [Setting] button.
•
Enter your 4-digit password and
press [Enter].
•
Press the [Date/Time] button.
•
Choose ‘12 HOUR’ mode or
‘24 HOUR’ mode by pressing
the square button. The selected
mode will be displayed in dark
grey colour with a tick box on the
right.
•
Press [NEXT] button to set time.
Set Date / Time
•
Press the [MENU] button for main
menu.
•
Press the [Settings] button.
•
Enter your 4-digit password and
press [Enter].
•
Press the [Temperature] button.
•
To adjust the temperature, press
the relevant temperature button
and then use the up and down
arrows.
Zip HydroTap
®
G4s are designed to operate within 1ºC to 2ºC of set point for
boiling water and between 3ºC to 5ºC for chilled and sparkling drinking water.
All boiling water units are self calibrating to 98ºC, which is the recommended
setting. Adjustments to the 98ºC setting are not recommended however
under certain circumstances adjustments may be made between 68º and
98ºC. See below.
Set temperature
HydroTap
®
G4 Set date/time screen
