801912UK - Commercial Boiling, chilled and sparkling user manual - Sept 2016- v2.04
Page 7 of 28
Arc and Cube HydroTap
®
G4
the OFF position.
When unattended, the control light will automatically default to the CHILLED
(blue illuminated) mode after a short period.
Tap lights
Red BOILING water
(safety, select and indicator)
lights
Continually illuminated
This indicates that the boiling water is ready.
Flashing slowly
This indicates that the boiling water is below the set dispense temperature.
Wait for the light to stop flashing before dispensing water. The light will
typically flash after switching on, or coming out of sleep mode.
Flashing quickly - warning light
When the indicator light flashes quickly and continuously, a system fault has
occurred.
Check for details on the faults screen (see page 12). If unable to rectify, call a
qualified service agent.
Blue CHILLED water lights
(safety, select and indicator)
Continually illuminated
This indicates that the temperature of the chilled water is within the set
temperature range.
Filter lights
All three tap lights (Safety, Select and Indicator light) will flash white every
10 seconds, indicating a filter change is required.
Reset the filter light
see page 14.
Flashing slowly
This indicates that the chilled water is not within the set temperature range.
When the chilled water is at the set temperature, the light will stop flashing.
This could take several minutes.
During heavy usage, the temperature can rise out of this range.
