ClearStream User Manual - Copyright © 2007, 2006 Ziova Corporation 59
Appendix B
Emergency Firmware Recovery
In the event that the ClearStream player has a corrupted firmware, due to a bad
flash or other means, an emergency recovery process has been put in place to allow
you to recover the player back to a working state.
You will need a USB2 memory stick or similar that is known to work with the
ClearStream player.
Step 1 -
Download the Recovery Image
•
Download the recovery image from “My Ziova” at
www.ziova.com
.
•
Copy the recovery files onto your memory stick, following the instructions
included in the download.
Step 2 -
Boot the Recovery Firmware
•
Power the player off.
•
Insert the memory stick into the front USB port.
•
Power the player on.
•
The player will now boot from the USB memory stick.
When the unit has finished booting…
Step 3
–
Start the Firmware Recovery
•
Select “Recover from USB” and press OK
•
Select “Firmware” and press “OK”
•
Read the on-screen prompt, and make sure you’re ready to proceed
•
Press “OK” to start the firmware recovery.
When the upgrade has finished, the player will reboot.
Step 4
–
Reboot to the New Firmware
Remove the USB memory stick.
Power the player off, wait 10 seconds and power the player back on.
The player will now boot up with the new firmware.
You will need to re-enter your settings.
