ClearStream User Manual - Copyright © 2007, 2006 Ziova Corporation 31
Wireless Network Setup
To work in a wireless network your ClearStream you will need to configure a few
things such as the name of your wireless access point and your WEP or WPA key.
WEP (Wired Equivalent Privacy) and WPA (WiFi Protected Access) use keys at both
the access point, and the device connecting to the access point to provide a means
of data encryption between the wireless network devices.
The ClearStream can use either 64bit or 128bit WEP protection or WPA protection.
WPA support may require a firmware update to be activated.
Check your Settings menu for WPA support.
Apart from the WEP or WPA Key and the access point, IP configuration for the
Wireless Network is the same as it is for the Wired Network.
Use “Auto” for the IP settings to acquire an IP address from a DHCP server, or
manually configure them.
Below is how to set the WEP key and access point in the wireless setup…
1. Select “Settings” at the start screen
2. Select “Network”
3. Select “Wireless Network”
4. Highlight “WEP Key” and press “OK”
A pop up window will appear.
Enter your WEP key matching the one set at
your wireless access point using the keys on
your remote control.
