ZIMO MX695, Инструкция по эксплуатации

Страница: 48 / 61

Page 48 Large-scale Decoder & Sound Decoder MX695/6/7/9
CV Bezeichnung
Werte-
Bereich
Default Beschreibung
situation. Define the (sound) speed in CV #375 (often used
for idle sound while coasting).
= 0: does NOT mean F0, but rather that NO key is assigned
for coasting.
= 1 ... 28: One of the function key
s F1 … F28 for “Coasting“
# 375
Coasting-Step
(or Notching)
0 - 10 0
Motor speed (sound) to be activated with coasting key (as
per CV #374), independent of driving situation.
= 0: Idle sound (typical coasting situations)
= 1 … 10: Sound speed (Diesel engines typically have 5 to
10 notches, which can be activated with the coasting key.
The volume for
“background” sounds (boiling, brake squealing etc.), function sounds, random
sounds and switch input sounds can be set within the sound selection proccedures (see the
“CV #300 procedures” above).
More convenient
however is the direct volume adjustment by CV’s (especially when no
sound selection is necessary, which is often the case). Of course, not all sounds listed below
are part of every sound project. Changing sound CV values of sound files that are not part of
the relevant sound project have no effect.
Background sounds - Volume adjustments :
#574 Boiling 0 - 255 0 Boiling volume
#576
Directions change
0 - 255 0 Directions change volume
#578
Brake squeal
0 - 255 0 Brake squeal volume
#580 Thyristor sound 0 - 255 0 Thyristor sound volume (ELECTRIC engine)
#582 Start whistle/horn 0 - 255 0 Start whistle/horn volume
#584
Blow-off
0 - 255 0 Blow-off volume (STEAM engine)
#586
Electric motor
0 - 255 0 Electric motor volume (ELECTRIC engine)
#588
Driving sounds
0 - 255 0 Driving sounds volume
#590 Switch gear 0 - 255 0 Switch gear volume (ELECTRIC engine)
#592 Second Thyristor 0 - 255 0 Second Thyristor volume (ELECTRIC engine)
#594
Panto up
0
– 255
0 Pantograph up volume (ELECTRIC engine)
#596
Panto down
0
– 255
0 Pantograph down volume (ELECTRIC engine)
#598
Panto stop (down)
0
– 255
0 Pantograph stop (down) (ELECTRIC engine)
#600 Turbo 0 - 255 0 Turbocharger volume (DIESEL engine)
#602 Dynamic brakes 0 - 255 0 Dynamic brake volume (ELECTRIC engine)
Note: The CV ahead of the CV’s listed (#573, 575 etc.) contain the sound sample numbers to be played.
Function sounds - Volume adjustments:
CV Designation Range
De-
fault
Description
#571 Function sound F0
0 - 255
=
100, 1-100 %
0
Sound volume operated with function key F0
= 0: full volume, original sound sample volume (same as 255)
= 1 .. 254: reduced volume 1 - 99,5 %
= 255: full volume
#514 Function sound F1 0 - 255 0 Volume for function sound F1
#517 Function sound F2 0 - 255 0 Volume for function sound F2
#520 Function sound F3 0 - 255 0 Volume for function sound F3
#523
Function sound F4
0 - 255 0
Volume for function sound F4
#526
Function sound F5
0 - 255 0
Volume for function sound F5
#529 Function sound F6 0 - 255 0
Volume for function sound F6
#532 Function sound F7 0 - 255 0
Volume for function sound F7
#535
Function sound F8
0 - 255 0
Volume for function sound F8
#538 Function sound F9 0 - 255 0
Volume for function sound F9
#541 Function sound F10 0 - 255 0
Volume for function sound F10
#544
Function sound F11
0 - 255 0
Volume for function sound F11
#547
Function sound F12
0 - 255 0
Volume for function sound F12
#550 Function sound F13 0 - 255 0
Volume for function sound F13
#553
Function sound F14
0 - 255 0
Volume for function sound F14
#556
Function sound F15
0 - 255 0
Volume for function sound F15
#559 Funktions-Sound F16 0 - 255 0
Volume for function sound F16
#562 Function sound F17 0 - 255 0
Volume for function sound F17
#565
Function sound F18
0 - 255 0
Volume for function sound F18
#568 Function sound F19 0 - 255 0
Volume for function sound F19
#674, #677…#698 = volume for sounds on F20, F21…F28.
Note: The in-between
CV’s above (#570, 572, #513, 515, 516, 518 etc.) hold information for the relevant
sound samples (sample numbers, loop parameters etc.), which can also be modified if needed, usually with
the CV #300 procedures.
Switch input sounds - Volume adjustments:
#739
Switch input sound S1
0 - 255
=
100, 1-100 %
0
Volume setting for the sound activated by switch input S1.
= 0: full volume, original sample volume (same as 255)
= 1 .. 254: reduced volume 1 - 99,5 %
= 255: full volume
#741 Switch input sound S2 0 - 255 0 Volume setting for the sound activated with switch input S2
#743 Switch input sound S3 0 - 255 0 Volume setting for the sound activated with switch input S3
NOTE: If a decoder comes with a potentiometer for volume control (mostly on large-scale
decoders), the pot meter should NOT be fully opened if full volume is not really desired (Loss of
sound quality if pot meter is fully open and at the same time the volume is heavily reduced by
CV’s!).